Snap Plug Gauge

Single End Fix Snap Gauges

Manufacturing Range Dia. 1.00 mm To Dia. 1000 mm (Std, Non-Std or Customized).
Above 1000 mm Dia.On Request.Dimensions & Gauge Design As per IS STD - 8023 - 1991.
Snap Gauges will be Plate Type.
Material - OHNS Steel Till Dia. 160.00 mm. Above 160 mm Dia. Snap Gauge Frame (Blank) of M.S. And Gauging Tips of OHNS Steel.
Application - In order to check Shaft in single operation by Go &NoGoFor Round OD or Block O.D.

Double End Fix Snap Gauges

Manufacturing Range Dia. 1.00 mm To Dia. 1000 mm (Std, Non-Std or Customized).
Above 1000 mm Dia.On Request.Dimensions & Gauge Design As per IS STD - 8023 - 1991.
Snap Gauges will be Plate Type.
Material - OHNS Steel Till Dia. 160.00 mm. Above 160 mm Dia. Snap Gauge Frame (Blank) of M.S. And Gauging Tips of OHNS Steel.
Application - In order to check Shaft by Separate method using Go &NoGo Separately with specific Gauge Length or Shaft Thickness Or Round OD or Block O.D.

Groove Snap Gauges

Manufacturing Range Dia. 5.00 mm To Dia. 500 mm (Std, Non-Std or Customized).
Above 500 mm Dia.On Request.Dimensions & Gauge Design As per IS STD - 8023 - 1991.
Snap Gauges will be Plate Type. Material - OHNS Steel, En-31, Tungsten Carbide.
Application - To Inspect Shaft O.D in respect Shaft Specific Groove or Thickness.

Adjustable Snap Gauges C Type

Manufacturing Range from Dia. 00 - 06 mm To Dia. 288 - 300 mm (In Std Ranges).
For Go NoGo Gauging with Reset Facility.
Hardened, Ground, Lapped Anvils.
Anvils Flatness - 0.0015 mm. Button Type Anvil is Standard.
Groove Type/ Pin Type Anvils On Request.
Dimensions & Gauge Design As per IS STD - 7606 - 1982.
Adjustable Snap also available in ‘A’ Type Or ‘U’ Type.

Dial Snap Gauges

Manufacturing Range from Dia. 00 - 25 mm To Dia. 275 - 300 mm (In Std Ranges).
Precise And Compact External Diameter Measurement.
Tungsten Carbide Anvils for Better Wear Resistance
Arrangement for Anti-Rotational Measuring Anvils.
Flatness of Anvils - 0.0015 mm. Dial Snap Gauge will be Without Dial. Cylindrical Setting Master Available On Request.

Tungsten Carbide Snap Gauges

Manufacturing Range Dia. 1.00 mm To Dia. 1000 mm (Std, Non-Std or Customized).
Above 1000 mm Dia.On Request.Dimensions & Gauge Design As per IS STD - 8023 - 1991.
Snap Gauges will be Plate Type for both Single End or Double End. Material - Tungsten Carbide.Application - For 100% Job/ Component Inspection or Calibration.
Also for Calibration of Number of Components Qty by Single Gauge for such a Long Time Period Or Duration.

Request A Quote